Post
2134
We tested the mechanical backlash of the Feetech STS3250 servo.
Using an 86 mm lever arm, we measured a tip displacement of 0.64 mm, which corresponds to an angular backlash of approximately 0.43°.
According to the datasheet, the maximum allowable backlash is 0.5°, so our measured value of 0.43° falls within the specified limit.
Using an 86 mm lever arm, we measured a tip displacement of 0.64 mm, which corresponds to an angular backlash of approximately 0.43°.
According to the datasheet, the maximum allowable backlash is 0.5°, so our measured value of 0.43° falls within the specified limit.